Mercury Instruments ENVEA Parts

Mercury Instruments and Envea Parts

201-03m 9390 Tygon tubing 4/7, photometer tubing or sample line

201-04 641 Activated Carbon Filter, filled with sulphurized activated carbon

201-11 155 Y-piece, glass, pinch valve / optical cell

201-12 156 Tubing reduction (PTFE), pinch valve / Tygontubing

202-05 646 Membrane Filter, PTFE, 50 mm diameter, 1µ, pack of 50 pcs.

202-06 4283 Signal cable, with BNC plug, l= 180 cm

202-07 941 PC connection cable, RS 232 port, 9-pol. and 25 ol. SUB-D-plug

202-07a 1548 PC connection cable, USB

202-10 202-10 Gold Filter Cartridge, for testing of nonspecific readings

202-15 202-15 Reference Screen, for Calibration test

203-01 4049 Membrane pump, NMP830, 9V

203-02 1973 Optical cell, l= 230 mm, completely made of synthetic fused silica (Suprasil)

203-03 516 Pinch valve

203-08 4282 LC-Display, Type Z1 LED

203-10 179 Sample Inlet fitting

203-12 4130 Tubing for pinch valve, 2 pcs.

203-52 6005 Microprocessor board, incl. Li-battery 301-10, 2x RS232

203-55 7033-O Optical bench, complete unit (without optical cell)

203-60 4053 Filter holder, clear plastic, holds 50 mm diam. Filters, without membrane and fitting, for models VM-3000 up to Ser.-No. 275

203-60a 4314 Filter holder, clear plastic, holds 50 mm diam. Filters, with 3 fixing screws, without membrane and fitting, for models VM-3000 starting with Ser.-No. 276

203-61 4050 UV Lamp, electrodeless spare lamp bulb

301-02m 9374 Sample tubing, FEP 4 x 6 mm, low memory effect, recommended for lengths > 10 m

301-10 465 Buffer battery for RAM, Li-Battery

301-11 4276 4-20 mA-IC with cooler

301-12 4266 Battery charger ACS 110 for VM-3000

301-15a Upon Request Cable for external loading of a 350-01a module

350-01a Upon Request NiMH Battery module, for VM-3000

670-12a 865 Adapter board for 203-08, for exchange of display 203-05

Mercury Tracker-3000 XS

380-00 Mercury Tracker-3000 XS

Accessories & Spare parts

Art.No. New Ref No Item

201-04 641 Activated Carbon Filter filled with sulphurized activated carbon

202-10 202-10 Gold Filter Cartridge, for testing nonspecific readings

203-61 4050 UV Lamp, electrodeless spare lamp bulb

301-02m 9374 Sample tubing, FEP 4 x 6 mm, low memory effect completely made of synthetic fused silica (Suprasil)

330-01 959 Quickfit connector, male part, on sample tubing

330-02 958 Quickfit connector, female part, sample In Tracker

350-02 4259 Sample filter, set of 10 pcs.

380-01 4107 Eneloop batterypack

380-02 12 optical cell, l= 150 mm, completely made of synthetic fused silica

380-03 4098 Complete set of inner tubing, tygon, incl. PP-connectors

380-04m 2512 Tygon tubing, 1/8" x 3/16", per meter, for inner tubing and telescopic probe

380-05 380-05 Telescopic probe, with frontfilter and Quickfit

380-06 4105 Battery charger ACS 110, with plug for Tracker XS

380-07 4219 Power supply 13V/3A 110 - 230 V, with plug for Tracker XS

380-09 380-09 Electromagnetic 2/3-way valve

380-10 2259 Buffer battery CR 20-16, for Tracker XS

380-11 4109 Sample filter, mounted with quickfit adapter

380-12 2230 LC Display Color, Tracker XS (can only be changed at MI facility)

380-13 Upon Request Adapter cable for cigarette lighter, with plug for Tracker XS

380-15 4106 Charging cable, for charging a spare battery 380-01

380-17 4101 Membranepump, KNF, PMM 2228-NMS020, 6V

380-18 380-18 Set O-Rings

380-20 2275 USB cable (A --- MiniB), for Tracker XS

380-40 2240 PT-Sensor for Tracker XS

380-96 4108-TR-XS Set of fuses for Tracker XS

Mercury Tracker 3000

Accessories & Spare parts

Ref. No. New Ref No Item

201-03m 9390 Tygon tubing for photometer, 4/7

201-04 641 Activated Carbon Filter filled with sulphurized activated carbon

201-11 155 Y-piece, glass, pinch valve to optical cell

201-12 156 Tubing reduction (PTFE) pinch valve tubing to tygontubing

202-05 646 Membrane Filter, PTFE, 47 mm diameter, 1µ, set of 50 pcs

202-06 4283 Signal cable, with BNC plug, l= 180 cm

202-07 941 PC connection cable to transfer Data to a PC via RS 232 port

202-10 202-10 Gold Filter Cartridge, for testing nonspecific readings

202-15 202-15 Reference Screen, for Calibration test

203-02 1973 Optical cell, l= 230 mm completely made of synthetic fused silica (Suprasil)

203-03 516 Pinch valve

203-08 4282 LC-Display, Typ Z1-LED Flatband

203-10 179 Fitting sample outlet

203-12 4130 Tubing for pinch valve, 2 pcs.

203-52 6005 Microprocessor board, incl. Li-battery 301-10, 2x RS232

203-60 4053 Filter holder

203-61 4050 UV Lamp, electrodeless spare lamp bulb

301-02m 9374 Sample tubing, FEP 4 x 6 mm, low memory effect recommended for lengths > 10 m

301-10 465 Puffer-Accu for RAM, Li-Battery

301-11 4276 4-20 mA-IC with cooler

301-12 4266 Batterycharger ACS 110

301-13 Upon Request Adapter Cable for cigarette lighter, with plug

301-14 4265 Power supply 13V/3A 110 - 230 V

301-15 Upon Request Charging cable, for charging of a spare battery

301-17 4321 Sample tubing for sampling probe 300-05, Tygon 1/8" x 1/4"

303-01 4054 Membrane pump, NMP30 9V

330-01 959 Quickfit connector, male part, on sample tubing

330-02 958 Quickfit connector, female part, sample In Tracker

Mercury Calibrator MC-3000

Ref. No. Item

400-00 400-00 Automatic Mercury Calibrator MC-3000

Mercury Calibrator MC-3000

Accessories & Spare Parts

Ref.No. New Ref No Item

101-07 611 Airfilter, 1 µ, with indicator for saturation

201-04 641 Activated carbon filter, sulfurized, internal

203-08 4282 LC-Display Z1 LED

203-52 6005 Microprocessor board, incl. Li-battery, 2x RS232, for MC-3000 until Ser.-No. 1106 (not for 1103 and 1105, which are MC-SM-4)

401-03 992 Mixing bottle, glass

401-04 4091 Activated carbon filter, sulfurized, external

401-04a 4334 Filterpads FP30, for 401-04, set = 10 pcs

401-05 881 Ventilator, 12V

401-06 2022 Converter for PT-100 Temperaturesensor

401-07 401-07 Pressure relief valve

401-12 Upon Request PT-100 temperature sensor

401-13 1234 3/2-ways valve

401-13a 707 Fitting for 401-13

401-15 1001 Quickfit sample or gas in, female, with valve

401-16 1549 Electronic Massflow controller 0-5ml (saturation)

401-16a Electronic Massflow controller Bürkert, 0-10ml (saturation), starting Ser.-No. 1347 (built- in SM-4)

401-17 4038 1 L sulfurized activated carbon

401-20 1232 Electronic Massflowcontroller 0-10l (dilution)

401-21 1233 Electronic Massflowcontroller 0-50ml (saturation)

401-22 1432 Quickfit for tubing, fitting to 401-15, male, 90^°

403-01a 403-01a Membrane pump, NMP30 9V (only for SM-4)

670-12a 865 Adapterboard for 670-12 or 203-08, in exchange for 203-05/06

905-52 905-52 Microprocessor board, incl. Li-battery, 1x RS232 and 1x RS485 for MC-3000 starting from Ser.-No. 1107 (also for 1103 and 1105, which are MC-SM-4)

Ref.No. New Ref No. Item

500-00 AULA 254 GOLD

500-04 ASD Automatic Sample Digester Module

Ref. No. New Ref No Item

101-10 598 Teflonmixer, 3 connectors, without screws

201-04 641 Activated sulfurized carbon filter suitable for sample-in and sample-out

203-02G 2020 Optical cell (GoldTrap), l = 230 mm, completely made of synthetic fused silica, AD 8 mm

203-52 6005 Microprocessor board, incl. Li-battery, RS232

203-61 4050 UV Lamp, electrodeless spare lamp bulb

301-10 465 Lithiumbattery, for microprozessor

505-15 505-15 Y-connection for sampling line, glass

505-16a 3163 3-level distributer, Teflon, with socket for mounting from outside

505-18 186 Crossflow reactor, glas

505-19 4337 Teflon-fitting, for reactor, 8mm x UNF 1/4"

505-21 938 Bottle for reducing reagent with screw cap, 1000 ml, clear

505-22 4336 Coupling pump-line - capillary, Teflon

505-26 4073 Alu-reaction coil heating block

505-27a 4057 Peltiercooler for Aula 254 (5V)

505-27b 505-27b Peltiercooler for Aula/ASD (12V)

505-30 505-30 Mass flow controller, Analyt, for table modell, separate, thermoelectronic, Argon 10 ... 100 ccm/min

505-30a 505-30a Mass flow controller, Bürkert, built in, vertical Aula 254, Argon 10…100 ccm/min

505-38 658 PTFE screw-coupling for tubes, UNF 1/4"

505-39 505-39 Sampler turntable with 53 positions for 10 ml sample vials

505-40 15 Sampler capillary, Stainless steel

505-41 505-41 Sampler capillary, PFA Teflon, with holder recommended for corrosive samples

505-42 505-42 Alu-foils for covering sample vials 40 mm diametre

505-43 505-43 Y-Connection cable, PC-Autosampler - Photometer

505-44 546 Sample vials, glass, 10 ml,

505-70 505-70 3-Channel peristaltic pump complete pump with DC motor

505-71 505-71 Membrane pump, 4,5 V, for rinse solution

505-72 1928 Motor, for peristaltic pump 505-70

505-73 4046 PC-board, for peristaltic pump 505-70

Automated Mercury Analysis System Aula 254Gold

Accessories & Spare parts

Ref. No. New Ref No Item

101-10 598 Teflonmixer, 3 connectors, without screws

201-04 641 Activated sulfurized carbon filter, suitable for sample-in and sample-out

203-02G 2020 Optical cell (GoldTrap), l = 230 mm, completely made of synthetic fused silica, AD 8 mm

203-52 6005 Microprocessor board, incl. Li-battery, 2x RS232

203-61 4050 UV Lamp, electrodeless spare lamp bulb

301-10 465 Lithium battery (single cell), for Microprocessor

505-18 186 Crossflow reactor, glass

505-19 4337 Teflon fitting, for reactor, 8mm x UNF 1/4"

505-21 938 Bottle for reducing reagent, with screw cap, 1000 ml, clear

505-22 4336 Coupling pump-line - capillary, Teflon

505-38 658 PTFE screw-coupling for tubes, UNF 1/4"

505-40 15 Sampler capillary, Stainless steel

505-41 505-41 Sampler capillary, PFA Teflon, with holder recommended for corrosive samples

505-42 505-42 Alu-foils for covering sample vials, 40 mm diametre

505-44 546 Sample vials, glass, 10 ml,

505-82 1145 Bottle for Rinsing water, 2000 ml, clear, with screw cap

506-16 3136 3-level distributer, Teflon, with white socket

506-26 506-26 Alu-reaction coil heating block

506-27 506-27 Peltier cooler (5V)

506-30 1820 Mass flow controller, Bürkert, built in, Modell 8713, calibrated for Ar, 10 ... 100 ccm/min

506-39 506-39 Sampler turntable, with 53 positions for 10 ml sample vials

506-55 506-55 Optical bench, complete unit (without optical cell), with different location of clambs

506-62 6043 Interfaceboard

506-72 2231 Motor of peristaltic pump

506-73 506-73 PC board, for peristaltic pump

506-74 1051 Pump head for peristaltic pump

506-79 506-79 Pump hose bracket, 3 channels

506-80 506-80 Compression lever for pump hose bracket

SM-3 Stack Monitor

Accessories & Spare parts,page 1

Ref. No. New Ref No Item

201-03m 9390 Tygon tubing, 4/7, internal tubing for photometer

201-04 641 Activated Carbon Filter

203-02 1973 Optical Cell l= 230 mm, entirely made of fused silica (suprasil)

203-08 4282 LC-Display, Type Z1 LED

203-52 6005 Microprocessor board, incl. Li-battery, 2x RS232

203-55 7033-O Optical bench, complete unit (without optical cell)

203-61 4050 UV Lamp, electrodeless spare lamp bulb

601-14 601-14 Flowmeter 6-60 l/h, incl. sensor and fitting

601-17 4085 Optical Sensor for Flowmeter

650-11 Upon Request Pressure Switch for cleangas

650-12 Upon Request Solenoid Valve, for cleaning air

650-13 Upon Request Cal-valve Y3, with fittings

650-14 Upon Request Ventilator

650-15 650-15 Temperature Controller, reactor, Ni-Cr-Ni

650-16 650-16 Temperature Controller, heated sampl.line, PT-100

650-17a 650-17a Membrane Pump, brushless

650-18 4226 Peristaltic Pump, 230V, complete

650-19 SM-5-00-31 Pump Tubing for 650-18

650-23 4155 Moisture Sensor

650-24 2311 Ventilator Inlet Filter Pad

650-25 4036 Particle Filter assembly, with flange, incl. aluminium sealing rings, 1 Set

650-26 650-26 Heating cartridge for Reactor, with Ni-Cr-Ni temperature sensor (650-44)

650-28 4031 Catalyst, (just during service in exchange)

650-28a Upon Request Exchange catalyst-material incl. cleaning of catalyst unit and changement of 2x filter frit disc 660-11

650-29m 9388 PFA Tubing, 4x6 mm

650-30m 9394 PFA Tubing, 6x8 mm for sample line

650-31 4088 Sealing Ring, aluminium, 1 Set = 2 pcs.

MMS

Automatic System for Mercury Monitoring in Air at Multiple Sampling Points

"Specifications: Detector:

Type: Mercury Vapor Monitor VM-3000

Filter holder 203-60, with stainless steel mounting bracket, replaceable membrane filter and fitting 1

"Air conditioning

Complete air conditioning system including cooler and heater. Cooler is mounted on one side outside the cabinet, heater is built inside the cabinet. Price includes installation." 1

"VModul I/O USB Alarm Relais Output (ordered directly with MMS)

Relais board with 16 potential free contacts. Each contact is dedicated to a sampling point. In case of a MMS-8 you can use 8 contacts for prealarm / 8 contacts for alarm. The contact is activated by the MMS software." 1

"VModul I/O USB Alarm Relais Output (ordered separately as an upgrade)

Relais board with 16 potential free contacts. Each contact is dedicated to a sampling point. In case of a MMS-8 you can use 8 contacts for prealarm / 8 contacts for alarm. The contact is activated by the MMS software." 1

"IP 65 protective housing surcharge

Fibreglass reinforced polyester cabinet instead of standard metal cabinet. Dimensions ca. 2025 x

840 x 600 mm (hxwxd). Color: grey RAL 7032. Door with acrylic window and lock. 18 W linear fluorescent lamp.

For use in corrosive atmosphere or for outdoor installations." 1

MOD-BUS Option, slave-operation, customized communication protocol 1

"Final Installation and Start-up of MMS

Includes configuration of software, start-up of the system and supervision of operation for one day." 1

"Calibration Service for MMS

Calibration of the system with mercury vapor calibration gas generator at 10 calibration levels. Calibration check with calibration gas at each sample point. " 1

Modem-option 1

MMS - Mercury Monitoring System

Accessories & Spare parts - I

Ref. No. New Ref No Item

101-21 1113 Inline Filter Cartridge, 25µ

201-03m 9390 Tygon Tubing, 4/7 mm, internal tubing for photometer

201-04 641 Activated Carbon Filter, filled with sulphurized activated carbon

201-11 155 Y-piece, glass, for the connection tubes between pinch valve and optical cell (VM)

201-12 156 Tubing size reduction piece (PTFE), for connection pinch valve and optical cell (VM)

203-02 1973 Optical Cell, l= 230 mm, completely made of synthetic fused silica (Suprasil)

203-03 516 Pinch Valve, photometer zero valve

203-08 4282 LC Display, Type Z1 LED

203-12 4130 Tubing for Pinch Valve, set = 2 pcs.

203-52 6005 Microprocessor board, incl. Li-battery, 2x RS232

203-55 7033-O Optical bench, complete unit (without optical cell)

203-60 4053 Sampling Filter Holder, clear plastic, holds 47-50 mm diam. Round filter membranes

203-61 4050 UV Lamp, electrodeless spare lamp bulb

301-10 465 Buffer Battery for RAM, Li battery type

301-11 4276 4-20 mA-IC, with heat exchanger

670-12a 865 Adapterboard for 203-08 in exchange with 203-06

701-01 4207 Flowmeter 25-250 l/h, complete with sensor

701-03 4208 Flowmeter 50-500 l/h, complete with sensor

701-06 Upon Request Membrane Pump NO22ANE

701-08 4130 Pinch Valve Tubing for valve unit older model 1 set = 2 pcs./ per channel

701-10 1082 Y-piece, glass, straight, for valve unit

701-13a 701-13a Membrane Pump, sampling pump for VM-3000

701-14 202 Membrane Set for 701-06

701-15 Upon Request Swagelok Inlinefilter for sample in, 2 µ, 1/4"-fitting

701-15b 4019 Replaceable Filterelement, for 701-15, 2µ, coated

701-16 Upon Request Swagelok-SS-T-filter, valve unit inlet, 15 µ

701-16b 4020 Replaceable filter element, for 701-16, 15 µ, coated

701-21 701-21 Ventilator, 120 x120 mm

701-22 Upon Request Heater, 500 W

701-24 Upon Request Solenoid Valve, SS, 2/2 ways, 12V

701-30 Upon Request 3/2-ways valve, 12V (=401-13)

701-31 Upon Request Needle valve, 90°

701-31a Upon Request Fitting set, for 701-31

702-05 22 Membrane Filter, for 203-60, Glass fibre GF52, 50 mm diam., set of 100 pcs.

703-03 517 Pinch Valve, 2S, 24V, for Gasmux GM-3000

703-04 1340 Power supply, 24V, 0.5 A

MMS - Mercury Monitoring System

Accessories & Spare parts, page 2

Ref. No. New Ref No Item

703-05 1348 Anybus Controller RTU RS232/485

705-01 3147 Single Valve for valve block 705-02

705-02 4024 Valve Block, incl. eight valves 705-01, stainless steel, silconert coated

705-05 6052 valve controller board, for Gasmux GM-3000

705-07 Upon Request SS-valve, 3/2- ways, 12V

705-08 Upon Request Needle valve, 6mm, 180°, black rotary knob

705-08a Upon Request Needle valve, 1/8", 90°, black rotary knob

705-09 Upon Request SS-valve, 2/2 ways, 24V

705-15a 1470 Suncontrol Filtermembrane

705-15b 1469 O-Ring, Viton, for 705-15, 1 Set=2 pcs.

705-15c Upon Request Support sieve, for 705-15

705-16 1985 Support elbow for tubing, for 4/6-tubes, blue color

750-03 750-03 Valve Unit valve 9-16, complete 19" module with heated multiplexer valve block

Ultratracer UT-3000

Accessories & Spare parts, page 1

Ref. No. New Ref No Item

101-07 611 Air Filter, 1µ (protection MFC), with humidity-indicator

101-07a 2076 Air Filter, 1µ (protection MFC)

101-21 1113 Inline Filter, 25µ (protection for needle valve)

201-04 641 Activated Carbon Filter, sulfurized

203-02G 2020 Optical Cell for GoldTrap, OD 8mm l= 230 mm, completely made of fused silica (Suprasil)

203-08 4282 Display Type Z1-LED, in exchange for former display 203-05 or starting from Ser.-No. 2086, also for Ser.-No. 975, 977 and 978

203-52 6005 Microprocessor board, incl. Li-battery, 2x RS232, until Ser.-No. 2255

203-61 4050 UV Lamp, electrodeless spare lamp bulb

670-12a 865 Adapter board for 203-08, needed for first exchange for display 203-05

810-10 4022 Hamilton Syringe, gastight, 10 µl

810-11 1137 Injection Needle for 810-10, 1 set = 3 pcs.

810-12 4251 Septa Set (10 pcs.) for Cal-Set-A, D=14mm

810-13 4252 Septa Set (10 pcs.) for Cal-Port-UT, D = 6,5 mm

810-14 1118 Ventilator for Automatic Calibrator, 24V

810-15 889 Automatic syringe for 810-02, 25µl, without needle, for modules up to ser.-no. 1230

810-16 3225 Syringe piston, complete, for 810-10

810-17 1117 Dryer Cartridge

810-18 1115 Power supply Automatic Calibrator

810-24 2313 Automatic syringe for 810-02, 25µl, without needle, starting for modules with Ser.-no. 1255

810-62 6013 Interface board UT-3000

820-01 Upon Request Protection and Transportation Case watertight, airtight, dustproof, crushproof; with 2" hard rubber transport wheels and a retractable extension handle; comfort grip.

830-01 Upon Request Sample Filter, 0,45 µ PTFE Membrane, disposable, set of 10 pcs.

830-02 830-02 2/3-Way Valve, goldtrap

830-03 1041 2/3-Way Valve, sample

830-04 4063 Electronic Mass Flow Meter (MFC)

830-06 595 Needle Valve, sampling flow

830-07 Upon Request Needle Valve, heating flow (Swagelok, up to Ser.-No. 525)

830-08 810 Needle Valve, heating flow (HOKE, from Ser.-No. 541)

830-10 4224 Rotary Vane Pump, 8 wings, standard UT-3000

830-11 4080 GoldTrap, complete unit, with cable and plug

830-12 997 PT-100 converter

830-14 881-S Ventilator, 12V, for UT-3000 standard version

Ultratracer UT-3000

Accessories & Spare parts, page 2

Ref.No. Item

Tubing

830-15 Upon Request Power supply GoldTrap

830-17 4272 Swagelok Calibration Port Fitting

830-24 4079 SS-Inlinefilter, protection between Cal-port and valve

830-55 7000-O Optical bench, complete unit (without optical cell)

830-95 4255 Set of Tubing, complete

830-98 Upon Request Service Kit, complete toolbox incl. 830-95 and special plugs for diagnostics, for standard UT-3000

905-52 905-52 Microprocessorboard, incl. Li-battery, 1x RS232 and 1x RS485, starting with Ser.-No. 2256

Ultratracer UT-3000

Natural Gas Application

Ref.No. New Ref No Item

800-

Natural Gas Application Accessories

Ref.No. Item

850-07 Upon Request "Coalescing filter unit

Required for each sample with condensing moisture, without installation in sampling system."

850-08 4019 Filter element, stainless steel, for 850-26, 2µ, coated

850-09 4025 Filter membrane, for coalescing filter 850-07 (5 pieces)

850-25 Upon Request Heated (50W) needle valve with coil, 1/16" tube, Hoke, incl. SS-angle and aluminiumpart

850-26 4323 T-filter with 2 µ filter element, complete SilcoNert coated

860-14 Upon Request Needle valve, heated , 1°

860-15 Upon Request Needle valve, 3°

SM-4 Stack Monitor

Accessories & Spare parts (page 1)

Ref. No. New Ref No Item

Probe /converter:

201-04 641 Activated carbon cartridge

906-07 4126 Critical orifice 1:45, 5 bar

907-15 1735 SS-filter 60µ, in front of 906-07, solgel coated

908-01 4163 Catalyst Cartridge, complete with catalyst filled

908-03 4157 Sample Filter Membrane PTFE, mounted together with coated supporting mesh with Silicon-O-ring for SS-filter 908-14

908-03a Upon Request Supporting Mesh for 908-03, coated

908-04 4066 Ejector with Swagelok T-piece, coated

908-05 937 Swagelok Inlinefilter, 7µ, P4-P

908-05a 1499 Filter element for 908-05

908-06 908-06 Orifice MS-valve, with fittings, V5-P

908-07 595 Needle valve, V4-P

908-08b 908-08b Clean-valve, 3/2-ways, 24V, V3-P, incl. Needle valve

908-09 1449 Control Valve for 908-02, 3/2 ways, 24V, V1-P

908-10m 9375 Tubing, PFA, 6mm OD/3mm ID

908-11 4095 Swagelok T-piece, 8mm, incl. SS-angle and reduction to 6mm, siltek-coated

908-12 4094 Swagelok T-piece, 6mm, siltek-coated

908-13 1406 Temperature-switch, 250° for heating T1

908-14 4204 Filter SS, with filter membrane 908-03, P1-P, coated

908-15 908-15 SS-tube with screw-nut, PFA 4/2 with Viton-overtube

908-16 1450 T-piece, for FEP 6/4 to connect 908-08 with 908-09

908-17 Upon Request Oszillating damper for Catalyst, ready for use

908-18 1850 Bulkhead-fitting, Gas Out, 8mm

908-19 1985 Tube-elbow, 6mm

908-20 1986 Tube-elbow, 8mm

908-21 1196 Tube-clip, 6mm, blue color

908-22 Upon Request Plug for evaporator

908-23 4144 Swagelok-fitting 8mm-6mm, exit of Kat, coated

908-24 908-24 PT-100 for T1

908-25 908-25 PT-1000 for T1

908-31 908-31 Heater cartridge, 350W, 96cm long,

908-50 2049 Calibration Valve (one way valve), opening pressure 5 psi

SM-4-6 Stack Monitor

Accessories & Spare parts (page 2)

Ref. No. Item

Controller:

907-11 1436 Snap-fit enclosure

909-01 909-01 Interface-board, SOV6.X with P-sensor and fuses

909-02 1276 P-sensor

909-03 1449 Security valve, 24V, 3/2-ways

909-04b 909-04b T-controller, OMRON T1, ready for use

909-05b 909-05b T-controller, OMRON T2, ready for use

909-06b 909-06b T-controller, OMRON T3, ready for use

909-07 4116 Solid State relais, for heating, T11, with cover

909-08 1326 Relais for cap rail

909-09 963 Linefilter 20A

909-12 6035 Microcontroller board, 1x RS232 and 1x RS485

Analyzer Cabinet:

401-17 4038 Sulfurized activated carbon, bulk material, 1 liter

905-01 905-01 Flow Meter Flow 1, 6-60l, without sensor

905-02 905-02 Flow Meter Flow 2, 6-60l, with sensor, regulated

905-03 905-03 Manometer P1, bis 4 bar, incl. Regler 3 bar

905-05 905-05 Manometer P3, 6 bar, incl. fine pressure regl. 10bar

905-06 4156 Cartridge P5, filled with activated carbon coal, 0,5 l

905-07 1352 P6, Oil Filter, 40µ

905-07a 199 Filter Element for 905-07, sintered brass, 40µ

905-07b 1970 Filter Element for 905-07, PTFE 5µ

905-08 1354 P7, Particle Filter, 0,01µ

905-08b 1968 Filter Element for 905-08

905-09 1416 P8, Beko Membrane Dryer

905-10 4074 P9, Ejector Pump, incl. Fittings

905-11 905-11 P10, Oil Filter with valve, 40µ

905-16 1200 Line filter E5, 10A

905-17 4198 Filter, without fittings

905-17a 1463 Screw for filter 905-17, 4/6 mm

905-17b 1463-D Screw for filter 905-17, 3/6 mm

905-17c 4197 Filter, with fittings, 2x 4/6mm, teflon-tight

905-17d 4196 Filter, with fittings, 1x 4/6 and 1x 3/6 mm, teflon-tight

905-17e 4195 Filter, with Fittings, 2 x 3/6mm, teflon-tight

906-26 4120 Manometer P4, 4 bar, incl. fine pressure regl. 3bar

907-13b 1987 Graphite-vespel ferrules, set of 10 pcs.

910-01 Upon Request Modem E10 for cap rail, with antenna without SIM

910-02 1340 Power supply E7 for cap rail, 24V

910-03 1833 Relais E11, for power-control of heated sample line

910-04 1832 Voltage controller, Siemens Sirius, E9

910-05 1804 Converter RS 232/485, galvanical separated, E8

910-06 1896 Heating for enclosure, 550W, with fan, thermostat

910-07a 910-07a Bypass-pump, E2,

910-08 4114 Maintenance switch, with 2 contact blocks

910-09 4088 Optical sensor for flowmeter

910-10 4117 Ball-valve, V1 + V3, with fittings

910-11 4125 Pressure switch, E1

910-12 6063 Interface-board, SM 4-6, IFV6.X

SM-4-6 Stack Monitor

Accessories & Spare parts (page 3)

Ref. No. Item

910-13 4121 Manometer P11,10bar, incl. fine pressure regl.10bar

910-14 4115 Manometer P2, 4 bar, incl. pressure regl., 0.2-6 bar

910-22 2341 Pad for Char coal filter, set of 20 pcs.

Photometer:

101-07 611 Particle Filter

101-21 1113 Inline Filter, 25µ

201-04 641 Activated Carbon Cartridge

203-02G 2020 Optical cell for GoldTrap, l= 230 mm, entirely made of fused silica (suprasil)

203-08 4282 Display, Z1 LED, green label

203-52 6005 Microprocessor board, incl. Li-battery, 2x RS232

203-61 4050 UV-lamp, nonelectrode

670-12a 865 Adapterboard for 203-08, in case of changing with a 203-06 display

830-02 830-02 2/3-way valve GoldTrap

830-11 4080 GoldTrap

830-55 7000-O Optical bench UT-3000, without optical ccell

830-95SM4-6 4248 Tubing Photometer

911-01 1405 Massflow controller, Vögtlin, 0-40l/h, with fittings

911-02 1081 Power supply for MFC, 24V

911-05 911-05 Temperature controller for photometer heating

911-06 911-06 Heater cartridge for photometer

911-07 904 Temperature sensor for heating, NiCrNi

911-08 911-08 Ventilator for heater, 230V, 92x92 mm

911-09 287 Temperature switch for photometer-heating

911-10 1894 Ventilator for photometer

911-52 6005 MT 25, Mikroprozessorboard with RS485

911-62 6003 Interface-board, for UT-3000

HovaCal:

912-01 912-01 Waste container

912-02 4122 Glasbottle for Cal.-solution, with cap, brown glas

912-03 912-03 Plastic holder for 912-02

912-04 912-04 FEP connection tubing for Cal-solution 1/8", 1m

912-05 4241 Pump tubing for HovaCal, Set =5 pcs.

912-06 4206 High pressure filter, with tubings and fittings

912-06a 2340 Filtermembrane for 912-06

912-07 912-07 Standard filter for Cal-solution, after pump, with tubing and fittings

912-07a 2794 Standard filter for Cal-solution, after pump, without tubing and fittings

912-09m 9384 PFA tubing for calibration solution, 1/16", 0,5 I.D.

SM-5 Stack Monitor

Ref. No. New Ref. No. Item

SM-5-00 SM-5 Automatic Mercury Stack Monitor

SM-5 Stack Monitor

Accessories & Spare parts (page 1)

Ref. No. New Ref No Item

Probe: SM-5-02

SM-5-02-01 SM-5-02-01 Mini heated line 1,5m for calibration with temperature controller and PFA tube

SM-5-02-02 SM-5-02-02 Mini heated line 1,5m for calibration, without temperature controller, with PFA tube and fittings

SM-5-02-03 2657 Temperature controller HR-EC-V2 for mini heated line for calibration

SM-5-02-04 2658 Scratch band for mini-heated line fixation

SM-5-02-05-0_6 SM-5-02-05-0_6 Probe SM-5, stinger length 0,6m

SM-5-02-05-1_0 SM-5-02-05-1_0 Probe SM-5, stinger length 1,0m

SM-5-02-05-1_5 SM-5-02-05-1_5 Probe SM-5, stinger length 1,5m

SM-5-02-05-2_0 SM-5-02-05-2_0 Probe SM-5, stinger length 2,0m

SM-5-02-06 4150 Fitting NPT1/4 to 6/4mm, silconert coated, for sample gas

SM-5-02-07 4035 Support insert 6/4, silconert coated

SM-5-02-08 2674 Non-return valve Swagelock 6mm, 10psi, inlet cal gas

SM-5-02-09 4151 Fitting NPT1/4 to 6/4mm, coated, for calibration gas

SM-5-02-10 SM-5-02-10 Heating cartridge for T9, 100W, length=40

SM-5-02-11 SM-5-02-11 Temperature fuse for T9, Microthrem, 216°C, coated

SM-5-02-12 2581 Temperature sensor PT100, 50mm, diam=3,0, coated

SM-5-02-13 4170 Swagelock adapter 6mm to 6mm, coated

SM-5-02-14 2830 Probe filter, M&C S-2K150

SM-5-02-15 2831 flat seal, Viton M&C

SM-5-02-16 2832 O-ring, Viton M&C, 39,0x3,5

SM-5-02-17 2833 O-ring, Viton M&C, 55,0x3,5

SM-5-02-18 1835 Flange gasket DN65PN6

SM-5-02-19 2834 Temperature sensor , PT100, M&C probe

SM-5-02-20 2835 Heating cartridge, 800W, M&C probe

SM-5-02-21 395 Swagelock ferrule 6x4, set = 2 pcs.

SM-5-02-22 1503 Swagelock Fitting 6x4 complete, set = 2 pcs

Controller: SM-5-06

SM-5-06-01 SM-5-06-01 Power board for SM-5 probe controller, 24V, calibrated, no cable

SM-5-06-02 2637 Heating block, 10W, for SM-5 probe controller in plastic enclosure

SM-5-06-03 2781 Heating block, 50W, for SM-5 probe controller in metallic enclosure

SM-5-06-04 SM-5-06-04 Solenoid valve V7a, 3/2, 24V, FluidConcept V365B01C, with fittings, without cable

SM-5-06-05 SM-5-06-05 Solenoid valve V9, 3/2, 24V, FluidConcept V365B01C, with needle valve and fittings, without cable

SM-5 Stack Monitor

Accessories & Spare parts (page 2)

Ref. No. Item

SM-5-06-06 6038 Interface board SM-5 probe controller, with actual software

SM-5-06-07 6041 Add-in board DBRS232 for ext. Display

SM-5-06-08 2785 Solid state relay XKA204020_4A

SM-5-06-09 SM-5-06-09 Solenoid valve V8, 2/2, 24V, G1/4, MS with fittings PP, no plug

Analyzer Cabinet: SM-5-00

SM-5-00-02 6033 Display Adapterboard

SM-5-00-03-T1 2571 OMRON temperature controller T1, configured

SM-5-00-03-T2 2571 OMRON temperature controller T2, configured

SM-5-00-03-T3 2571 OMRON temperature controller T3, configured

SM-5-00-03-T4 2571 OMRON Temperature controller T4, configured

SM-5-00-04 SM-5-00-04 Main relay K5, 12V, 30A

SM-5-00-05 2562 Solid state relay for Heating T1, T2, T3, K1-K3, 24V, 15A

SM-5-00-06 2563 Solid state relay for Heating T4, K4, 24V, 30A

SM-5-00-07 2564 Relay for Status, K6 - K10 24V, 6A

SM-5-00-08 2788 Solid state relay 3-pinned for 3-Phase heated line

SM-5-00-09 6036 SM-5 interface board, without box

SM-5-00-10 SM-5-00-10 Oven T1, with metallic security strip, wall brackets and 2 temperature sensors

SM-5-00-11 2754 Temperature sensor NiCrNi for T1

SM-5-00-12 SM-5-00-12 Heating cartridge 350W, 230V for T2 or T3

SM-5-00-13 2581 Temperature sensor PT100 for T2 or T3

SM-5-00-14 2580 Temperature sensor PT1000 for T2 or T3

SM-5-00-15 2587 Insulation sleeve for T2

SM-5-00-16 2601 Insulation sleeve for T3

SM-5-00-17 SM-5-00-17 Absorber material with glass jar and metallic clamp

SM-5-00-18 2533 Graphite ferrule 8mm, for glass part upstream from oven

SM-5-00-19 2603 Glass part: Upstream Oven T1

SM-5-00-20 2604 Glass part: Oven glass reactor T1

SM-5-00-21 2605 Glass part: Upstream from Absorber vessel T2

SM-5-00-22 2606 Glass part: Absorber vessel T2

SM-5-00-23 2607 Glass part: Downstream from Absorber vessel T2

SM-5-00-24 2608 Metal clamp 29/32

SM-5-00-26 2761 Gas cooler ECP1000C without glass vessel

SM-5-00-27 SM-5-00-27 Glass vessel for Gas cooler ECP1000C with fittings

SM-5-00-28 SM-5-00-28 O-rings (PTFE) for Gas cooler vessel (3 pcs)

SM-5-00-29 SM-5-00-29 Condensate pump Watson Marlow, only for series with Gas cooler ECP1000, 24V, incl. cable

SM-5-00-30 2236 Fittings for condensate pump tubing, 1x straight, 1x curved, only for Watson Marlow pump

SM-5-00-31 9401 Condensate pump tubing, 5 pieces, for Watson Marlow and M&C pump

SM-5-00-32 SM-5-00-32 Solenoid valve V2, 24V, 3/2, incl. 3x fittings G1/8 PP

SM-5-00-33 SM-5-00-33 Dust filter Fi5, incl. 2 fittings G1/8 PP

SM-5-00-34 SM-5-00-34 Maintenance kit for Fi4 act. Charcoal filter (2x fitting G1/8 PP, 1x O-ring, 2x pad)

SM-5-00-35 1983 T-piece DN04/06 PP

SM-5 Stack Monitor

Accessories & Spare parts (page 3)

Ref. No. Item

SM-5-00-36 4155 Humidity sensor E20, incl. T-piece, cable and plug

SM-5-00-37 SM-5-00-37 By-pass pump E4 incl. cable and plug

SM-5-00-38 SM-5-00-38 Flowmeter By-pass FL1 incl. sensor, plug and 2x fittings

SM-5-00-39 2624 Pressure regulator Fi6, 0,5-8bar, 5µm, without fitting

SM-5-00-40 2626 Filter Fi7 after P-regulator, 0,01µm, without fitting

SM-5-00-41 SM-5-00-41 Service display incl.connection cable

SM-5-00-42 4032 Activated charcoal filter Fi4 or Fi8 filled, incl. fitting

SM-5-00-43 4088 Sensor for flowmeter incl. cable and plug

SM-5-00-44 1970 Filter insert for Fi6, 5µm, white

SM-5-00-45 2838 Filter insert for Fi7, 0,01µm, green

SM-5-00-46 2763 Condensate pump M&C, 24V, 115/230V, incl. tubing

SM-5-00-47 SM-5-00-47 Pressure sensor, calibrated, without cable, with protection

SM-5-00-48 2755 Temperature converter E16, for T1

SM-5-00-49 SM-5-00-49 Set of fuses for cabinet

SM-5-00-50 1895 Thermostate for roof fan E17, with temperature sensor

SM-5-00-51 2573 Temperature sensor for cabinet, PT1000

SM-5-00-52 2839 Filter pad for roof fan, set = 4 pcs

SM-5-00-53 2840 Filter pad for outlet filter front door

SM-5-00-54 1776 Display with up to date software, without frame

SM-5-00-55 SM-5-00-55 Glass vessel for Gas cooler ECP1000 with fittings

SM-5-00-56 2536

Photometer SM-5-00-01

SM-5-00-01-01 230-56 SM-5 optical bench, without optical cell

SM-5-00-01-02 6057 Power board SM-5 photometer

SM-5-00-01-03 6030 HG motherboard, version SM-5, without add-in board

SM-5-00-01-04 6032 SM-5 Modbus-LAN Board

SM-5-00-01-05 6028 SM-5 Connection board

SM-5-00-01-06 4176 Solenoid valve V1, with fittings and plug, 12V, 3/2

SM-5-00-01-07 SM-5-00-01-07 Membrane pump E5 with plug and cable

SM-5-00-01-08 1556 OMRON Temperature controller T10, configured

SM-5-00-01-09 SM-5-00-01-09 MFC 0-2,5NL/h, Type 8713 with fittings for SM-5 photometer

SM-5-00-01-10 SM-5-00-01-10 Set of tubing for SM-5 photometer

SM-5-00-01-11 SM-5-00-01-11 Potentiometer for over-voltage protection SM-5 Photometer, set in protective housing

SM-5-00-01-12 SM-5-00-01-12 Temperature sensor for optical bench with cable and plug

SM-5-00-01-13 SM-5-00-01-13 Needle valve V3 with fittings for SM-5 Photometer

SM-5-00-01-14 SM-5-00-01-14 Buffer cylinder after MFC, with fittings

SM-5-00-01-15 SM-5-00-01-15 Temperature fuse optical bench, without cable, with white isolating protection

SM-5-00-01-16 128 Temperature sensor T10 (OMRON), PT100, for optical bench with cable, without plug

SM-5 Stack Monitor

Hg-general spare parts (page 4)

Ref. No. Item

HG-001 4050 UV-Lamp incl. teflonholder and screw

HG-002 Upon Request HF-board, tested

HG-003 1973 Optical cell, OD 12 mm, Length: 230 mm, (VM,SM-5)

HG-004 2020 Optical cell, OD 8 mm, Length: 230 mm, (UT)

HG-010 9374 Tube FEP, 6x1 OD/Wall, ID 4mm

HG-011 9388 Tube PFA, 6x1 OD/Wall, ID 4mm

HG-012 9390 Tube Tygon, OD 7,1, ID 3,97, W 1,57, E-3603

HG-013 9391 Tube Tygon, OD 7,9, ID 4,8, W 1,6, E-3603

HG-014 9392 Tube Tygon, OD 6,4, ID 3,2, W 1,6, E-3603

HG-020 158 Bulkhead fitting, straight, DN04/06, PP

HG-021 707 Screw, G 1/8, DN04/06, PP

HG-022 1984 Screw, G1/4, DN04/06, PP

HG-023 1983 T-piece, DN04/06, PP

HG-030 830-01 Filter, Ø45, 1µm, glassfibre, 90

HG-031 1113 Filter 25µm, Inline, blue, DIF-MN70

HG-032 641 Activated carbon coal filter, Inline, DIA-BN-415

HG-033 611 Filter 0,3µm, Inline, F400

HG-034 1117 Dryer cartridge, IAC500

HG-035 2076 Filter 0,1µ, Inline, blue, DIF-BN50I

HG-036 4038 Activated carbon coal, bulk material, 1Liter

HG-037 4259 Filter Ø37, 1µm, glassfibre

HG-040 4316 Hose clip 6,1mm, metall, galvanized, 1 set = 10 pcs

HG-041 4317 Hose clip 6,8mm, metall, red, 1 set = 10 pcs

HG-042 4318 Hose clip 8,1mm, metall, green, 1 set = 10 pcs

HG-043 4319 Hose clip 8,6mm, metall, blue, 1 set = 10 pcs

HG-050 2259 Lithium button cell battery, 3V, CR2032

HG-051 2274 SD memory card, micro, 8GB

HG-052 2240 P-Sensor for circuit board, HG-Mainboard, 8Pins

HG-058 4268 Optical bench refurbished in exchange

Request a Quote | (303) 972-3740

M309472 - Mercury Instrument LLC - Trust Badges.png
NIST Traceable Calibration 1.jpg

Mercury Instruments Envea Parts

Mercury Instruments USA is a distributer for all Mercury Instruments and Envea Mercury Analyzer Parts, Supplies and Service

Contact Us Today

Please fill out the form below to receive a quote and be transferred to a link where you can download the shipping instructions and return authorization form.

For additional service information please feel free to contact Nick Hummell at (303) 972-3740 ext. 201 or at nick@mercury-usa.com.

Request a Quote | (303) 972-3740